Oki IP-6620 Maintenance Manual page 100

(b) FEED MEDIA and BACK FEED MEDIA
In the EDGE SENSOR ADJUST menu, select FEED MEDIA or BACK FEED MEDIA with the Up
and Down buttons.
>>EDGE SENSOR ADJUST
 FEED MEDIA
Hold the OK button pressed to feed or backfeed the media.
FEEDING MEDIA...
Release the OK button to stop feeding or backfeeding and to return to the previous screen.
>>EDGE SENSOR ADJUST
 FEED MEDIA
(c) SENSOR ADJ VAL
Enter a value for the edge sensor side position.
In the EDGE SENSOR ADJUST menu, select SENSOR ADJ VAL with the Up and Down
buttons, and then press the OK button.
>>EDGE SENSOR ADJUST
 SENSOR ADJ VAL
Select ±XX.X  ±YY.Ymm with the Up and Down buttons, and then press the OK button.
>>>SENSOR ADJ VAL
 ±XX.X  ±YY.Ymm
±XX. X : Current value
±YY.: Value after change
Setting range: 10.0 to 20.0
Print sample
3-60
OKI Data Infotech Corporation CONFIDENTIAL
Chapter 3 Maintenance Mode Functions and Operations
>>EDGE SENSOR ADJUST
 BACK FEED MEDIA
◎
BACKFEEDING MEDIA...
>>EDGE SENSOR ADJUST
 BACK FEED MEDIA
◎
◎
◎
The adjustment value is the length of the
margin you have measured on the printout.
(Unit : mm)
◎
◎