Oki IP-6620 Maintenance Manual page 485

3.
Hook the 98 N (10 kgf) tension gauge to
the BRACKET(DSE64B-SUB)-MW hole
(see the figure below).
4.
Pull the gauge to display the tension
value indicated below.
<Adjustment value>
Tension: 34.3 N ±2 N (3.5 kgf)
5.
While maintaining the indicated tension
value, first secure the screw (1), then
secure the screw (2).
<Torque value>
Screw tightening torque: 1.5 N・m (15Kgf・cm)
6.
Secure the three screws shown in the
figure.
<Torque value>
Screw tightening torque: 1.5 N・m (15Kgf・cm)
7-10
BRACKET(DSE64B-SUB)-MW
OKI Data Infotech Corporation CONFIDENTIAL
Chapter 7 Adjustment
(1) (1) (2) (2)