5.3.6
Communication-related messages
NO DATA RECEIVED
CHECK CONNECTION
<Description>
An error has been detected in the USB connection during print data transfer.
<Action>
If the problem is not solved even after replacing the USB cable check the Items to be Checked
on the table below, and perform the actions starting from the top until the problem is solved.
No
1
Firmware
2
PCB-ASSY-IPB5-100
DATA COMMUNICATION
WAS INTERRUPTED
<Description>
A timeout error has occurred during print data transfer.
<Action>
If the problem is not solved even after replacing the USB cable, perform the same actions as with
NO DATA RECEIVED CHECK CONNECTION.
5-42
Chapter 5 Troubleshooting (Engine Section and USB Controller Section)
Items to be Checked
OKI Data Infotech Corporation CONFIDENTIAL
Upgrade the firmware to the latest version.
Replace the PCB-ASSY-IPB5-100.
Action