Oki IP-6620 Maintenance Manual page 349

<Assembly>
1.
Put the DRIVING PULLEY and Y DRIVE
MOTOR in place together, and
temporarily fix the three screws with the
timing belt loosened.
2.
Attach the hole at the SUS-BELT
extremity to the carriage protrusion.
3.
Attach the SUS-BELT securing screw
and tighten it at 1.5 N·m (15 kgf·cm)
torque.
4.
Adjust the SUS-BELT tension (see 7.2).
5.
Remove the PLATE-CLOSEHOLE-MW
with two fixing screws.
6.
Adjust the timing belt tension (see 7.3).
Note
Adjust the tension of the timing belt after the
SUS-BELT. The tension of the timing belt will
be high if it is adjusted first.
6-20
OKI Data Infotech Corporation CONFIDENTIAL
Chapter 6 Parts Replacement (Disassembly/Reassembly)