Oki IP-6620 Maintenance Manual page 113

The following message is displayed when the ink cartridges are installed to the main tank. In this
case, close the ink box cover.
* If the ink cartridges are not installed, install them.
CLOSE INK BOX COVER
Press the OK button.
START PRIMING PH?
OK?
The pump stops running.
Note
Again check that the print heads and the jig
SINGLE COLOR FILLING TOOL(MV) are
correct.
FILLING WITH LIQUID
TIME REQUIRED
Remove the jig SINGLE COLOR FILLING TOOL(MV) and press the OK button.
REMOVE
INK SUCTION TOOL
Check that a waste ink bottle is installed and press the OK button.
START PH RECOVERY
BOTTLE IS EMPTY?
A normal cleaning is performed.
PH RECOVERING
REQUIRED TIME
Chapter 3 Maintenance Mode Functions and Operations
◎
Y:YY
◎
◎
XXXXXXX
Y:YY
OKI Data Infotech Corporation CONFIDENTIAL
3-73