7.
Rotate the cog wheel of the REMAINING
INK SENSOR to the clockwise direction
until it stops.
8.
Install the REMAINING INK SENSOR
with two screws.
9.
Remove the STOPPER-PLT with two
screws.
10.
Install the STOPPER-PLT so that the
bent part of the TRAY-BU comes below
the bent part on the STOPPER-PLT
(normal configuration).
STOPPER-PLT
TRAY-BU
OKI Data Infotech Corporation CONFIDENTIAL
Cog wheel
Chapter 7 Adjustment
7-33