OKI Data Infotech Corporation CONFIDENTIAL
Chapter 8 Operation Mechanism
BACK & FWD HIGH is an advance mode that prevents the media from sticking. In this mode, the
operation to separate the media from the platen is performed during each scan.
BACK & FWD MAX is an advance mode that prevents the media from sticking. In this mode, in
addition to the operation to separate the media from the platen that is performed when printing
starts and after a pause, the suction fan power and the media advance speed are adjusted. This
mode is recommended when printing on thin banner.
The printing speed in the BACK & FWD LOW, BACK & FWD HIGH, and BACK & FWD MAX
modes is slower that in FORWARD ONLY mode.
The FWD LESS WRINKLES mode, used to advance media that has wrinkled before printing, is
also available for media that wrinkles easily, such as solvent printing coated paper.
In this mode, the media is advanced 55 cm before the printing starts if 5 minutes or more has
passed since the previous printing finishes.
8-17