Oki IP-6620 Maintenance Manual page 128

3.4.3.4 TEST PATTERNS
Press the MAINTENANCE button, select TEST PATTERNS with the Up and Down buttons, and
then press the OK button.
MAINTENANCE
 TEST PATTERNS
Parameter
VERTICAL STRIPES
HORIZONTAL STRIPES
CHECKERBOARD
GRID,1-DOT LINE
SOLID COLOR
GRADATION
MEDIA ADV ACCURACY
LINE WIDTH CHECK
Parameter
PRINT
MODE
SMART PASS
DIRECTION
LENGTH
NO OF SHEETS
K
C
M
Y
Lc
Lm
Gy
3-88
Chapter 3 Maintenance Mode Functions and Operations
◎
Description
Vertical stripes
Horizontal stripes
Checkerboard
Grid with line width of 1 dot
Solid color pattern
Gradation pattern
Pattern to measure the media advance accuracy
Pattern to measure the line width
Description
Print the test pattern.
Select the print mode.
Configure the smart pass setting.
Select between bidirectional and unidirectional printing.
Define the print length.
Define the number of sheet.
Select whether or not print the pattern with the K color.
Select whether or not print the pattern with the C color.
Select whether or not print the pattern with the M color.
Select whether or not print the pattern with the Y color.
Select whether or not print the pattern with the Lc color.
Select whether or not print the pattern with the Lm color.
Select whether or not print the pattern with the Gy color.
OKI Data Infotech Corporation CONFIDENTIAL
Normally,
set it on.
Remark
Remark