Oki IP-6620 Maintenance Manual page 461

5.
From the GEAR-BOX-MW, remove the
COVER-GEAR-BOX-2 with four securing
screws.
Note:
Only two screws are shown in the figure.
6.
Remove the SHAFT(CLUTCH)-ASSY.
7.
To remove the torque limiter:
Remove the R pin, and remove the
torque limiter.
8.
To remove the TUR EM clutch:
Remove the two securing screws, and
remove the TUR EM clutch.
6-132
OKI Data Infotech Corporation CONFIDENTIAL
Chapter 6 Parts Replacement (Disassembly/Reassembly)
GEAR-BOX-MW
SHAFT(CLUTCH)-ASSY
GEAR(TL-S)
Securing screw
GEAR(66)-CL
Torque limiter
COVER-GEAR-BOX-2
TUR EM clutch
R pin