Table of Contents
Advertisement
Other Error Messages
●
Other Error Messages
●
This section explains the causes and remedies for an error message and the function of the
<ATTENTION> indicator. An error message appears on the display screen of the operator panel.
To display an error code, press the <HELP> button on the operator panel.
Error Messages
Error
3
code
420
Press ONLINE button for Restoration
Memory Overflow
310
%COVER% Open.
311
Please see HELP for details
320
Check Fuser Unit
348
Please see HELP for details
Check Data
Message Data Write Error<%CODE%>
610
Toner Not Installed
611
%COLOR%
612
613
Please see HELP for details
544
Check Toner Cartridge
545
Improper Lock Lever Position
546
%COLOR%
547
Please see HELP for details
540
Toner Sensor Error
541
%COLOR%
542
543
Please see HELP for details
430
Install Paper Cassette
440
%TRAY%
Please see HELP for details
356
Install New Belt Unit
Belt Unit Life
Please see HELP for details
File System is Full
Message
<ATTENTION>
indicator
Blinks
The memory overflowed.
Reduce the data amount. If that does not
work, reduce the size of the print data.
Blinks
The cover is open.
Close the cover.
310 : Output tray
311 : Front cover
Blinks
The fuser unit is not correctly installed.
Install the fuser unit correctly in a printer.
Lights up
Writing of message data to be uploaded to a
printer has been failed.
Blinks
The toner cartridge of the indicated color
is not installed correctly. Install the toner
cartridge correctly.
610 : Yellow (Y)
611 : Magenta (M)
612 : Cyan (C)
613 : White (W)
Blinks
The toner cartridge of the indicated color is
not locked properly.
Turn the blue lever on the right side of the
cartridge backwards until it stops.
544 : Yellow (Y)
545 : Magenta (M)
546 : Cyan (C)
547 : White (W)
Blinks
Something is wrong with the toner sensor of
the indicated color or the image drum is not
installed correctly.
Install the toner cartridge or image drum of
the indicated color correctly.
540 : Yellow (Y)
541 : Magenta (M)
542 : Cyan (C)
543 : White (W)
Blinks
A paper cassette is not in the indicated tray.
Insert the paper cassette into the indicated
tray.
If the cassette is already inserted in the
printer, pull out the cassette and set it again
to correctly locate it.
430, 440 : Tray1
Blinks
The belt unit is at the end of its life.
Replace it with a new belt unit.
Lights up
The file system is full.
- 78 -
Cause/Remedy
Advertisement
Table of Contents
