Setting The Time That Elapses Before Entering The Power Save Mode - Oki PRO330S User Manual

Setting the time that elapses before entering
the power save mode
If the machine is not used for a certain period of time, it shifts to the power save mode. The
factory default setting is 0 minutes.
1
Check that "READY TO PRINT" appears on the display.
2
Press « ∧ » or « ∨ » several times to display [MENUS], and then press
«OK».
3
Press « ∧ » or « ∨ » several times to display [SYSTEM ADJUST], and press
«OK».
4
When [POW SAVE TIME] is displayed, press «OK».
5
When the setting value flashes, press « ∧ » or « ∨ » to display your
desired value, and then press «OK».
6
Check that "*" is displayed to the right of the value which you want set.
7
If you press «ONLINE», the machine returns to the standby state "READY
TO PRINT".
- 57 -