CHAPTER 8
Connecting the SRX5600 Services
Gateway
Tools and Parts Required for SRX5600 Services Gateway Connections
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
This section includes the following topics:
Tools and Parts Required for SRX5600 Services Gateway Connections on page 65
Connecting the SRX5600 Services Gateway to Management and Alarm
Devices on page 66
Connecting Network Cables to SRX5600 Services Gateway IOCs and Port
Modules on page 68
To connect the device to management devices and to power on the device, you need
the following tools and parts:
Phillips (+) screwdrivers, numbers 1 and 2
2.5-mm flat-blade (-) screwdriver
2.5-mm Phillips (+) screwdriver
Wire cutters
Pliers
Electrostatic discharge (ESD) grounding wrist strap
Overview of Installing the SRX5600 Services Gateway on page 43
Connecting the SRX5600 Services Gateway to a Network for Out-of-Band Management
on page 66
Connecting the SRX5600 Services Gateway to a Management Console or an Auxiliary
Device on page 67
Connecting an SRX5600 Services Gateway to an External Alarm-Reporting Device on
page 67
Connecting Network Cables to SRX5600 Services Gateway IOCs and Port Modules
on page 68
65