Unpacking The Srx5400; Tools And Parts Required To Unpack The Srx5400 Services Gateway; Unpacking The Srx5400 Services Gateway - Juniper SRX5400 Hardware Manual

Connecting Power to a DC-Powered SRX5400 Services Gateway on page 203
9. Power on the services gateway:
Powering On an AC-Powered SRX5400 Services Gateway on page 202
Powering On a DC-Powered SRX5400 Services Gateway on page 206
10. Perform the initial system configuration as described in
Gateway" on page 209.

Unpacking the SRX5400

IN THIS SECTION

Tools and Parts Required to Unpack the SRX5400 Services Gateway | 172

Unpacking the SRX5400 Services Gateway | 172

Verifying the SRX5400 Services Gateway Parts Received | 174
Tools and Parts Required to Unpack the SRX5400 Services Gateway
To unpack the services gateway and prepare for installation, you need the following tools:
Phillips (+) screwdriver, number 2
1/2-in. or 13-mm open-end or socket wrench to remove bracket bolts from the shipping pallet
Blank panels to cover any slots not occupied by a component
Unpacking the SRX5400 Services Gateway
The services gateway is shipped in a wooden crate. A wooden pallet forms the base of the crate. The
device chassis is bolted to this pallet. A Getting Started Guide and a cardboard accessory box are also
included in the shipping crate.
"Initially Configuring the SRX5400 Services
172