Srx5400 Host Subsystem; Srx5400 Services Gateway Host Subsystem Overview - Juniper SRX5400 Hardware Manual

SRX5400 Host Subsystem

IN THIS SECTION

SRX5400 Services Gateway Host Subsystem Overview | 59

Switch Control Board SRX5K-SCB Overview | 60
Switch Control Board SRX5K-SCB Specifications | 61
Switch Control Board SRX5K-SCBE Overview | 64
Switch Control Board SRX5K-SCBE Specifications | 65
Switch Control Board SRX5K-SCB3 Overview | 68
Switch Control Board SRX5K-SCB3 Specifications | 69
Routing Engine SRX5K-RE-13-20 Overview | 70
Routing Engine SRX5K-RE-13-20 Specifications | 71
Routing Engine SRX5K-RE-1800X4 Overview | 74
Routing Engine SRX5K-RE-1800X4 Specifications | 75
Routing Engine SRX5K-RE3-128G Specifications | 78
SRX5400 Services Gateway Host Subsystem Overview
The host subsystem is composed of a Routing Engine installed in a Switch Control Board (SCB). The host
subsystem provides the routing and system management functions of the services gateway. You must
install one host subsystem on the device. The host subsystem components are as follows:
Switch Control Board
SRX5K-SCB–from Junos OS Release 9.2 to 12.3X48
SRX5K-SCBE–from Junos OS Release 12.1X47-D15 and later
SRX5K-SCB3–from Junos OS Release 15.1X49-D10 and later
SRX5K-SCB4–from Junos OS Release 19.3R1 and later
NOTE: SRX5K-SCB4 is not supported on SRX5400 Services Gateways.
Routing Engine
59