Troubleshooting The Srx5400; Troubleshooting The Srx5400 Services Gateway With The Junos Os Cli - Juniper SRX5400 Hardware Manual

Troubleshooting the SRX5400

IN THIS SECTION

Troubleshooting the SRX5400 Services Gateway with the Junos OS CLI | 337

Troubleshooting the SRX5400 Services Gateway with Chassis and Interface Alarm Messages | 338
Chassis Component Alarm Conditions on SRX5400, SRX5600, and SRX5800 Services Gateways | 338
Troubleshooting the SRX5400 Services Gateway with Alarm Relay Contacts | 355
Troubleshooting the SRX5400 Services Gateway with the Craft Interface LEDs | 355
Troubleshooting the SRX5400 Services Gateway with the Component LEDs | 356
Troubleshooting the SRX5400 Services Gateway Cooling System | 357
Troubleshooting SRX5400 Services Gateway MPCs | 357
Troubleshooting SRX5400 Services MICs | 359
Troubleshooting SRX5400 Services Gateway SPCs | 360
Troubleshooting the SRX5400 Services Gateway Power System | 361
Behavior of the SRX5400, SRX5600, and SRX5800 Services Gateways When the SRX5K-SCBE and
SRX5K-RE-1800X4 in a Chassis Cluster Fail | 364
Troubleshooting the SRX5400 Services Gateway with the Junos OS CLI
The Junos OS command-line interface (CLI) is the primary tool for controlling and troubleshooting services
gateway hardware, Junos OS, routing protocols, and network connectivity. CLI commands display
information from routing tables, information specific to routing protocols, and information about network
connectivity derived from the ping and traceroute utilities.
You enter CLI commands on one or more external management devices connected to ports on the Routing
Engine.
For information about using the CLI to troubleshoot Junos OS, see the appropriate Junos OS configuration
guide.
337