Toro Groundmaster Series Service Manual page 186

Installing the Steering Cylinder (continued)
Hydraulic System: Service and Repairs
g314861
D. Start the engine and turn the steering wheel to full right turn. Set the key
switch to the O
E. Adjust the right steering stop bolt until it contacts the right drag link.
F. Tighten the steering stop bolt jam nuts and the steering cylinder rod end
ball joint clamp.
8. Check the hydraulic fluid level and adjust if necessary before returning the
machine to service.
Figure 68
position.
FF
Page 5–100 Groundsmaster ® 3200, 3300 and 3310
19240SL Rev A