Toro Groundmaster Series Service Manual page 137

Adjusting the Traction System for Neutral (continued)
Groundsmaster ® 3200, 3300 and 3310
19240SL Rev A
5. Tighten the locknut to secure the adjustment.
6. Set the key switch to the O
7. With the traction pedal in the N
the face of the neutral switch and the pump lever and adjust if necessary;
refer to Adjusting the Traction Neutral Switch (page
8. When finished, remove the jack stands and lower the machine to the ground.
9. Test the machine for proper traction system operation before returning the
machine to service.
position.
FF
position, measure the air gap between
EUTRAL
Page 5–51
6–29).
Hydraulic System: Adjustments