Toro Groundmaster Series Service Manual page 300

Blade Spindle Assemblies (continued)
Cutting Units: Service and Repairs
B. For Groundsmaster series cutting units, align the spindle grease fitting
with the decal on the cutting unit for each spindle.
2. Install the blade, hex bushing or anti-scalp cup, and blade bolt.
• For standard series cutting units, tighten the blade bolt from 68 to 81 N∙m
(50 to 60 ft-lb).
• For Groundsmaster series cutting units, tighten the blade bolt from 135 to
149 N∙m (100 to 110 ft-lb).
3. Slowly rotate the cutting blades to check that the blades do not contact any
deck component(s).
4. For Groundsmaster series cutting units, lubricate the spindle grease fittings
before returning the cutting unit to service.
5. Lower the cutting unit and install the drive belt and belt covers.
Page 8–8 Groundsmaster ® 3200, 3300 and 3310
19240SL Rev A