Toro Groundmaster Series Service Manual page 118

Test Procedure – Front Wheel Motor (continued)
g301210
1. Front left wheel motor
Hydraulic System: Testing the Hydraulic System
2. Front right wheel motor
4. Cap the disconnected hydraulic line with a hydraulic ORFS cap, and plug the
port of the disconnected wheel motor with a hydraulic ORFS plug.
5. Disconnect the rear wheel motor on the opposite side of the front motor
being tested from the traction circuit:
Clean the bulkhead and hose fittings on the side of the machine.
Figure 32
Page 5–32
3. A port
Groundsmaster ® 3200, 3300 and 3310
19240SL Rev A