Hood - Toro Groundmaster Series Service Manual

Hood

Removing and Installing the Hood
Chassis: Service and Repairs
g297644
1. Hood assembly
2. Hair pin (2 each)
Refer to Figure 124 for this procedure.
1. With the hood closed, remove the hair pins and clevis pins from the hood
hinges.
2. Lift the hood assembly from the machine.
3. Install the hood in the reverse order.
4. Adjust the bracket to contact the front of the hood when the rear of the hood
contacts the cooler shroud seal.
Figure 124
3. Clevis pin (2 each)
Page 7–24 Groundsmaster ® 3200, 3300 and 3310
19240SL Rev A