Adjusting The Doors - Toro Groundmaster Series Service Manual

Adjusting the Doors

g316080
1. Striker stud
2. Shim (as required)
3. Adjuster
Operator Cab: Adjustments
4. Lock nut
5. Striker guard
6. Frame
1. Use shims under the striker stud if necessary for proper door latch
engagement.
2. Check the door adjustment to ensure that proper sealing occurs at the 2
points indicated. The distance between the sealing surface of the frame
and the outer edge of the door trim when the door is fully latched should be
from 19 to 25 mm (0.8 to 1.0 inch).
3. Loosen the striker stud lock nut to move the striker stud and adjust the door
fit. Disassemble the striker stud and rotate the adjuster to increase stud
movement if necessary.
Figure 146
Page 9–8
7. Door seal
8. Door panel
Groundsmaster ® 3200, 3300 and 3310
19240SL Rev A