Radiator - Toro Groundmaster Series Service Manual

Radiator

g296183
1. Air cleaner intake hose
2. Radiator/hydraulic fluid cooler
(radiator)
3. Coolant drain valve
4. Radiator/hydraulic fluid cooler (fluid
cooler)
5. Support bracket – RH (non-cab
version shown)
6. Radiator foam (2 each)
7. Radiator foam (2 each)
8. Radiator shroud assembly
Groundsmaster ® 3200, 3300 and 3310
19240SL Rev A
9. Foam seal (2 each)
10. Foam seal (2 each)
11. Fuel cooler (31902/31903)
12. Fuel hoses (31902/31903)
13. Clamp (31902/31903)
14. Coolant reservoir hose
15. Coolant reservoir
16. Support bracket – LH
The radiator on your Groundsmaster 3200/3300 is combined with the hydraulic
fluid cooler. The radiator and hydraulic fluid cooler should be removed from the
machine as an assembly. If desired, the radiator and hydraulic fluid cooler may
be separated once the assembly is removed from the machine.
Figure 14
17.
18.
19.
20.
21.
22.
23.
24.
Page 4–13
Radiator hose (lower)
Radiator hose (upper)
Fan shroud
Shroud retainer bracket
Hydraulic tube assembly
Hydraulic fitting – straight
Hydraulic fitting – elbow
Hydraulic tube assembly
Engine: Service and Repairs