Service And Repairs; Air Cleaner Assembly - Toro Groundmaster Series Service Manual

Service and Repairs

Air Cleaner Assembly

g295904
1. Air intake hose
2. Hose clamp (3 each)
3. Air cleaner assembly
4. Intake hose
5. Mounting bracket
Removing the Air Cleaner Assembly
Installing the Air Cleaner Assembly
Groundsmaster ® 3200, 3300 and 3310
19240SL Rev A
6. Cap screw (2 each)
7. Flange nut (2 each)
8. Carriage bolt (2 each)
9. Cap screw (3 each)
10. Cap screw (2 each)
Refer to Figure 11 for this procedure.
1. Park the machine on a level surface, lower the cutting unit (or attachment),
engage the parking brake, set the key switch to the Off position and remove
the key from the key switch.
2. Raise the hood.
3. Remove the air cleaner components if necessary.
4. Refer to Traction Unit Operator's Manual for air cleaner service and
maintenance procedures.
5. Examine the air cleaner housing and cover for wear and damage that could
cause possible air leaks. Replace components if necessary.
6. Examine the air intake hoses for wear or damage and replace the hoses
if necessary.
Refer to Figure 11 for this procedure.
Figure 11
11.
12.
13.
14.
Page 4–9
Cap screw (3 each)
Cap screw
Cap screw (2 each)
Hose clamp
Engine: Service and Repairs