Operator Seat - Toro Groundmaster Series Service Manual

Operator Seat

Removing and Installing the Operator Seat
Chassis: Service and Repairs
g314395
1. Console mount kit
2. Bracket kit
3. Lower console mount
4. Seat switch harness
5. Cushion cover
Standard seat (model 31980), mechanical suspension seat (model 31981), and
air ride suspension seat (model 31982) are available for the Groundsmaster
3200/3300 machines. For additional seat switch information, refer to
(page 6–27). For additional seat suspension information, refer to
Suspension Seat (Model 31981) (page 7–28)
(Model 31982) (page 7–29).
1. Park the machine on a level surface, lower the cutting unit (or attachment),
engage the parking brake, set the key switch to the O
the key from the key switch.
2. Disconnect the electrical connector from the seat switch. On air ride
seat suspension systems, disconnect the electrical connector from the air
compressor.
3. Remove the fasteners securing the seat tracks to the seat box.
4. Remove the seat assembly from the machine.
5. Repair or replace the seat or seat components as necessary.
6. Secure the seat tracks to the seat box.
Figure 126
(standard seat shown – model 31980)
6. Back cover
7. Seat belt kit
8. Seat track kit
9. Seat switch
10. Armrest kit
Page 7–26
Seat Switch
Mechanical
or Air Ride Suspension Seat
position and remove
FF
Groundsmaster ® 3200, 3300 and 3310
19240SL Rev A