Parking Brakes - Toro Groundmaster Series Service Manual

Parking Brakes

g313947
1. Brake drum
2. Wheel hub nut
3. Wheel hub
4. Retaining ring
5. Cap screw (4 each)
6. Hold down cup (2 each)
7. Hold down spring (2 each)
8. Brake shoe
Disassembling the Parking Brakes
Groundsmaster ® 3200, 3300 and 3310
19240SL Rev A
9. Clevis pin
10. Brake actuator
11. Brake actuator lever
12. Retainer plate
13. Dust boot
14. Rivet (4 each)
15. Spring – actuator
16. Spring – pivot
Refer to Figure 112 for this procedure.
1. Remove the front wheel; refer to
7–5).
2. Disengage the parking brake and remove the brake return spring, cotter pin,
clevis pin and washer that attach the brake cable to the brake actuator lever.
3. Remove the brake drum.
4. The brake shoes can be serviced without removing the wheel hub. If brake
plate removal is necessary:
A. Use a torque multiplier and remove the wheel hub nut. Discard the
locknut.
Figure 112
17.
18.
19.
20.
21.
22.
23.
Removing and Installing the Wheels (page
Page 7–7
Hold down pin (2 each)
Clevis pin
Washer
Return spring
Cotter pin
Woodruff key
Brake plate
Chassis: Service and Repairs