Toro Groundmaster Series Service Manual page 266

Removing and Installing the Wheels (continued)
Servicing the 2WD Rear Wheels/Hubs
Chassis: Service and Repairs
Failure to maintain proper torque could result in failure or loss of
wheel and may result in personal injury.
Maintain the proper torque of the wheel fasteners.
Tighten lug nuts evenly in a crossing pattern.
7. Tighten the wheel fasteners to the specified torque; refer to the specifications
table for Chassis (page
8. Check and adjust the tire pressures; refer to the specifications table for
Chassis (page 2–5).
The wheel/hub replacement parts are not currently available separately. Replace
the entire wheel/hub assembly if necessary.
WARNING
2–5).
Page 7–6 Groundsmaster ® 3200, 3300 and 3310
19240SL Rev A