Toro Groundmaster Series Service Manual page 282

Removing and Installing the PTO Clutch (continued)
Chassis: Service and Repairs
8. Use medium strength thread locking compound and install the spacer, spring
washers, and the cap screw securing the clutch to the stub shaft. Tighten
the cap screw from 68 to 81 N·m (50 to 60 ft-lb).
9. Install the clutch stop strap. Ensure that the spacers are in the stop strap and
that the strap is tight against the clutch flange.
10. Connect the PTO clutch to the machine wire harness and secure the harness
to the machine with cable ties.
11. Install the PTO shaft; refer to
7–19).
Removing and Installing the PTO Shaft (page
Page 7–22 Groundsmaster ® 3200, 3300 and 3310
19240SL Rev A