Toro Groundmaster Series Service Manual page 6

Service Procedure Icons
Preface
The following icons appear throughout this Service Manual to bring attention to
specific important details of a service procedure.
Critical Process
This icon is used to highlight:
•
installing safety equipment (shields, guards, seat belts, brakes and R.O.P.S.
components) that may have been removed
•
dimensions or settings that must be maintained for proper machine operation
•
a specific fastener tightening sequence
•
component orientation that may not be obvious
Critical Torque
This icon is used to highlight an assembly torque requirement that is different than
what is recommended in the Standard Torque Tables; refer to
for Dry, Zinc Plated, and Steel Fasteners (Inch Series) (page 2–10)
Torque for Dry, Zinc Plated, and Steel Fasteners (Metric Fasteners) (page
Fluid Specifications
This icon is used to highlight fluid specifications and capacities that are less
common, and may not appear on the machine service decal or in the machine
Operator's Manual.
Note: Refer to the service decal on the machine and the machine Operator's
Manual for commonly used fluid specifications and capacities.
Page 6
Standard Torque
and Standard
Groundsmaster ® 3200, 3300 and 3310
19240SL Rev A
2–11).