Toro Groundmaster Series Service Manual page 203

Testing the Fusible Link Harness (continued)
Groundsmaster ® 3200, 3300 and 3310
19240SL Rev A
Note: Do not replace individual fusible link conductors of the fusible link
harness. If any of the harness links are open (failed), replace the entire
fusible link harness.
6. After you complete the testing, ensure that the fusible link harness connectors
are correctly attached to the starter and machine wire harness. Connect the
positive battery cable to the battery terminal and then connect the negative
cable to the battery.
Page 6–11 Electrical System: Testing the Electrical Components