Toro Groundmaster Series Service Manual page 329

Installing the Control Panel and Windshield Wiper Assembly (continued)
Groundsmaster ® 3200, 3300 and 3310
19240SL Rev A
3. With the wiper motor in it's home position, install the wiper arm assembly.
The wiper blade should be approximately 7 cm (2.75 inch) from the right
edge of the windshield when in the home position. Install the flange nuts
and tighten from 23 to 25 N∙m (17 to 18 ft-lb).
4. Connect the windshield wiper switch to the wire harness and install the
control panel cover.
5. Connect the washer hose.
6. Test wiper and washer operation before returning the machine to service.
Page 9–15 Operator Cab: Service and Repairs