Adjustments; Adjusting The Compressor Belt Tension - Toro Groundmaster Series Service Manual

Adjustments

Adjusting the Compressor Belt Tension

Groundsmaster ® 3200, 3300 and 3310
19240SL Rev A
g316005
1. Compressor
2. Turnbuckle
3. Jam nut – left hand thread
Compressor belt tension = 9.5 mm (0.38 inch) deflection when 4.5 kg (10 lb)
is applied to the top of the belt half way between the engine and compressor
pulleys.
Note: The jam nut at the bottom of the turnbuckle has left hand threads.
1. Loosen the jam nuts at each end of the turnbuckle.
2. Rotate the turnbuckle to increase/decrease belt deflection as necessary.
3. Tighten the jam nuts and recheck the belt tension.
Figure 145
4. Jam nut – right hand thread
5. V-belt
Page 9–7 Operator Cab: Adjustments