Hydraulic Fluid Cooler - Toro Groundmaster Series Service Manual

Hydraulic Fluid Cooler

g296183
1. Air cleaner intake hose
2. Radiator/hydraulic fluid cooler
(radiator)
3. Coolant drain valve
4. Radiator/hydraulic fluid cooler (fluid
cooler)
5. Support bracket – RH (non-cab
version shown)
6. Radiator foam (2 each)
7. Radiator foam (2 each)
8. Radiator shroud assembly
Hydraulic System: Service and Repairs
9. Foam seal (2 each)
10. Foam seal (2 each)
11. Fuel cooler (31902/31903)
12. Fuel hoses (31902/31903)
13. Clamp (31902/31903)
14. Coolant reservoir hose
15. Coolant reservoir
16. Support bracket – LH
The hydraulic fluid cooler on your Groundsmaster 3200/3300 is combined with
the radiator. The procedure for removing and installing the radiator and hydraulic
fluid cooler as an assembly are provided; refer to
desired, the radiator and hydraulic fluid cooler may be separated once the
assembly is removed from the machine.
Figure 48
17.
18.
19.
20.
21.
22.
23.
24.
Page 5–66
Radiator hose (lower)
Radiator hose (upper)
Fan shroud
Shroud retainer bracket
Hydraulic tube assembly
Hydraulic fitting – straight
Hydraulic fitting – elbow
Hydraulic tube assembly
Radiator (page 4–13). If
Groundsmaster ® 3200, 3300 and 3310
19240SL Rev A