Toro Groundmaster Series Service Manual page 134

Test Procedure (continued)
g301265
1. Steering cover
2. Front tie-down bracket
3. Operator platform assembly
4. Parking brake cover
Hydraulic System: Testing the Hydraulic System
3. Raise the front of the operator platform to access the lift cylinder hydraulic
fittings: refer to Figure
A. Remove the steering cover fasteners and raise the steering cover.
B. Remove the front tie-down bracket.
C. Raise the hood and remove the hood support bracket (item 4).
D. Remove the parking brake cover.
E. Remove the 2 fasteners (item 10) securing the fire wall to the frame.
F. Remove the 6 fasteners (items 6 and 11) securing the operator platform
assembly to the frame.
G. Raise and support the front of the operator platform assembly.
5. Hood support bracket
6. Cap screw (2 each)
7. Flat washer (2 each)
8. Fire wall
42.
Figure 42
10.
11.
Page 5–48
9. Flange nut (2 each)
Cap screw (2 each)
Carriage bolt (4 each)
Groundsmaster ® 3200, 3300 and 3310
19240SL Rev A