Toro Groundmaster Series Service Manual page 243

Testing the Fuel Pump (continued)
Groundsmaster ® 3200, 3300 and 3310
19240SL Rev A
When testing the fuel pump output, do not turn the key switch to
the S position.
TART
5. Place the disconnected hose end into a 0.95 liter (1 quart) graduated cylinder
and set the key switch to the R
deliver approximately 350 ml (11.8 ounces) in 30 seconds. Replace the
fuel pump if necessary.
6. After testing, connect the fuel hoses and secure with hose clamps.
7. Prime the fuel system; refer to
IMPORTANT
position for 30 seconds. The pump should
UN
Priming the Fuel System (page
Page 6–51 Electrical System: Testing the Electrical Components
4–18).