symptoms an oximeter might display. Refer to the listed section for corrective
actions.
Power
No power using AC and/or DC power source.
Fails power-on self-test.
Powers down without apparent cause.
Keys
Oximeter does not respond proerly to pressed keys.
Display/Alarms
Display does not respond properly.
Alarms and other tones do not sound properly or sound
without apparent cause.
Operational Performance
Display appears to be operational, but shows no readings.
Suspect readings.
Data Port
Oximeter data port not functioning properly.
Prompts, Error Messages, and Error Codes
Prompts and Error Messages
Occasionally, the menu area displays a prompt or error message. In most instances,
messages remain displayed for a set time. This depends on the criticality of the
message. High priority messages overwrite low priority messages. Messages of the
same priority display in order of occurrence. For multiple messages, lower priority
messages display when higher priority conditions clear. The highest priority is "1"
and the lowest is "3. " Messages remain on the screen until the condition clears if the
time-out setting is NONE. If the message has a maximum time to remain on the
screen, it will have a time-out setting.
Note:
Pressing the ALARM and/or ALARM SILENCE keys clears some messages. Pressing the ALARM
SILENCE key silences any audible tone and the second press clears the message.
Service Manual
Table 23. Problem Categories
Symptom
10030881 Rev. B 12-2008
Prompts, Error Messages, and Error Codes
Recommended Corrective Action
See Power, page 152.
See Keys, page 153.
See Display/Alarms, page 153.
See Operational Performance, page 154.
See Data Port, page 154.
141