Nellcor OXIMAX N-600X Series Service Manual page 148

Troubleshooting
Error Code
285
286
287
288
289
290-511
512
512
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
148
To Purchase, Visit Avobus.com
Table 26. Error Code Listing for Non-correctable Failures
Category
Sensor trend not open.
Sensor trend already open.
Sensor trend
Sensor trend data unavailable.
All sensor trend data read.
Incompatible private label.
Reserved for future back end object errors.
UIF General failure of UIF Module generic post.
Battery Dead battery/Missing battery.
Real time clock is non-operational.
Application code is not present in the Flash.
Invalid Flash type.
Serial clock line is not toggling or is toggling at an incorrect rate.
Application program is corrupt.
Invalid Nell-1A version.
Error in the start up sequence.
OS multi-tasking service failure.
A state machine has received an unknown state transition.
The operation just attempted was not completed successfully - for
example, Institutional Defaults could not be reset.
An unexpected value was received - for example, an out-of-range
parameter was passed to a function.
CRC EEPROM CRC failure.
%SpO module not responded.
2
Institutional parameters lost - e.g. for UIF: Institutional EEPROM section
CRC
CRC corrupt.
Current settings lost - e.g. for UIF: Institutional EEPROM section CRC
corrupt.
Critical low battery.
Battery
Low battery error.
External watchdog failure.
Power PC watchdog failure.
Boot NVROM un-initialized error.
Failed CRC check of application code in flash.
CRC
Failed periodic ram CRC check on application code running in RAM.
10030881 Rev. B 12-2008
or call 1-800-674-3655
Description
Service Manual