Nellcor OXIMAX N-600X Series Service Manual page 147

Error Code
54-128
129-171
172-255
256
257
258
259
260
261
262
263
264
265
%SpO
266
267
268
269
270
271
272
273
274
275
276
277
278
279
%SpO
280
281
282
283
284
Service Manual
Table 26. Error Code Listing for Non-correctable Failures
Category
Reserved for future front end object errors.
LPS Unexpected LPS error (LPS recovered from this error).
Reserved for future back end object errors.
%SpO back end reports beginning of packet missing.
2
%SpO back end reports packet start ID (SID) missing.
2
%SpO back end reports packet length error.
2
%SpO back end reports message length error.
2
%SpO back end reports packet contains unsupported key.
2
%SpO back end reports packet CRC error.
2
% back end reports end of packet missing.
%SpO back end reports packet contains undefined key.
2
%SpO back end reports corrupted variable.
2
%SpO back end reports memory overflow.
2
back end
2
%SpO back end reports bad pointer.
2
%SpO back end reports parameter value out-of-range.
2
%SpO back end reports reset detected.
2
%SpO back end reports unexpected value.
2
%SpO back end reports time-out.
2
%SpO back end reports not ready/not initialized.
2
%SpO back end reports double fault.
2
%SpO back end reports date out-of-range error.
2
%SpO back end reports incompatible software version.
2
%SpO back end reports incorrect registration number.
2
%SpO back end reports sensor read failure.
2
%SpO back end reports sensor signature verification fails.
2
%SpO back end reports warmed sensor temperature set point failure.
2
%SpO back end reports warmed sensor /%SpO
2
back end
2
%SpO back end reports does not support feature required by sensor.
2
%SpO back end reports overflow/underflow.
2
%SpO back end reports sensor activation failure.
2
%SpO back end reports sensor write failure.
2
ECG trigger error.
10030881 Rev. B 12-2008
Prompts, Error Messages, and Error Codes
Description
front end incompatible.
2
147