Nellcor OXIMAX N-600X Series Service Manual page 65

Common Menu Options
1. BACK softkey— Return to the previous menu level without exiting the selected
menu area entirely.
2. NEXT softkey—Proceed to the next screen of menu options for that menu set.
3. EXIT softkey—Exit to the main menu or press BACK until you reach an EXIT menu
option.
Main Menu
The main menu softkey options provide access to several submenus.
1. Menu—Select standard oximeter upper and lower SpO
LIMITS
limits and alarm management settings for either adults or neonates.
2. Menu—Select method of viewing oximeter trend and sensor data.
TREND
Note:
In the case of a SatSeconds or an SPD event, the oximeter proceeds straight to the MONITR
menu. Clear any alarm condition(s) to access the TREND menu.
3. Menu—Use this softkey to control oximeter viewing options, sensor setup,
SETUP
clock setup and language viewing options. Also configure the communication
port, the nurse call feature, and control analog voltage.
4. Menu—Leave the display backlight on, adjust brightness, or choose to
LIGHT
turn the display backlight off.
LIMITS Menu
1. softkey—Use this softkey only after you have chosen the NEO screen or
SELECT
the ADULT screen using the appropriate softkey. Then, use the SELECT softkey to
scroll through each limit setting option until you reach the limit value you wish to
change.
Service Manual
Figure 25. Main Menu Options
Figure 26. Limit Menu Options for Neonates
10030881 Rev. B 12-2008
Using Oximeter Softkey Menus
or pulse rate
2
65