Nellcor OXIMAX N-600X Series Service Manual page 69

a record-enabled sensor to keep the date and time consistent for as long as the sensor
remains connected. Since a sensor with sensor event record data can be transported
from one oximeter to another, having discrepancies in the date/time between
oximeters and the sensor event record data will affect the order in which the sensor
event record data appear. To eliminate this potential problem, set all oximeters within
an institution to the same time.
To set the date and time
1. With the oximeter in the normal monitoring mode, press the SETUP softkey.
2. Press the NEXT softkey.
3. Press the CLOCK softkey.
4. Press the SET softkey.
5. Press the SELECT softkey to select the TIME and DATE fields as shown.
6. Use the ADJUST UP or ADJUST DOWN keys below the
selected value.
7. Press the EXIT softkey.
4. LANG Menu—Select and view one of eleven (11) languages for ease in reading
oximeter screens, as well as obtaining and printing client data in the preferred
language. Available languages are listed below.
•
ENGLISH
•
DANSK (Danish)
•
DEUTSCH (German)
•
ESPAÑOL (Spanish)
•
FRANCAIS (French)
•
ITALIANO (Italian)
•
NEDERLANDS (Dutch)
•
NORSK (Norwegian)
•
PORTUG (Portuguese)
•
SUOMI (Finnish)
•
SVERIGE (Swedish)
Service Manual
TIME HOURS : MINUTES : SECONDS
DATE DAY - MONTH - YEAR
Figure 27. Time and Date Screen
10030881 Rev. B 12-2008
Using Oximeter Softkey Menus
ALARM SILENCE
key to change the
69