Nellcor OXIMAX N-600X Series Service Manual page 82

Managing the Data Port
3. Dump Trend—Obtain current trend information. View up to 45 hours of trend
information. Information presented includes:
•
•
•
•
•
•
•
•
•
•
•
4. Dump Error Log—Intended for Nellcor's personnel to obtain or view information
from memory that includes instrument type, software revision level, printout
type, time of printout, operating time of the recorded error, error number, task
number, address, and count.
5. Exit Interactive Mode—Closes the interactive mode and returns the data port to
normal operation.
To establish data port communication
1. Use the Data Port Setup display to set the baud rate and the protocol of the data
port on the OxiMax N-600x pulse oximeter.
2. With the oximeter in the normal monitoring mode, press the SETUP softkey.
3. Press the NEXT softkey twice and then press the COMM softkey.
4. Press the SELECT softkey.
82
To Purchase, Visit Avobus.com
Printout Type
Oximeter Type
Software Revision and CRC data
%SpO and Pulse Rate Limit Settings
2
Adult or Neonate Setting
Response Mode
Date And Time
%SpO
2
Pulse Rate
Pulse Amplitude
Status
Figure 40. Serial Port Setup Screen, Baud RateProtocol Selection
10030881 Rev. B 12-2008
or call 1-800-674-3655
Figure 39. Sample Trend Dump
Service Manual