Table of Contents
Advertisement
Configuration (Part I)
Figure 34: DCC-3000 and CTPM-1000 with TPM 800 Installed
Configuring bootp Daemon
The bootp daemon (bootpd) uses the file /etc/bootptab to reply to bootp requests made by the DCC
and TPM cards in a system containing spans. The DCC must always be set for bootp because it is
used in conjunction with a TPM, see
1. Insert the following lines in the bootptab file to configure the TPM:
TPM1100AMR-tms3-155:
tftpboot:bf=ramTPM1100.cmp;tp1100-AMR-7-1.ini
:ht=ethernet:ha=00908f076e91:ip=10.7.156.12
dcc34:sm=255.255.0.0:gw=10.7.203.72:td=/
tftpboot:bf=:ht=ethernet:ha=008001D01015:ip=10.7.156.14
• sm - specifies the subnet mask.
• td - (target directory) specifies the directory on the boot server from which to obtain
images and initialization files.
Avaya Media Processing Server 500 Hardware Installation and Maintenance
70
Configuring the DCC Boot ROM
:sm=255.255.0.0:gw=10.7.203.72:td=/
Comments? infodev@avaya.com
on page 58.
October 2014
Advertisement
Table of Contents
