Changing The Network Settings - Avaya Media Processing Server 500 Hardware Installation And Maintenance

• The standard IP for the terminal server is 10.7.200.50 with a netmask of 255.255.0.0.
• The standard gateway is that of the first application processor or 10.7.200.100 (you can
change this to accommodate your network requirements).
• Domain parameters are not needed.

Changing the Network Settings

1. Type n and follow the prompts to make your configuration settings.
2. Save the settings.
After making changes, save the configuration in the flash memory. Enter 7 in the Quick
Configuration Menu and answer y to confirm the save.
3. When the system shows the InReach>> prompt, enter reload to reboot the server. The
reboot process displays the system activity on the console.
4. When the Login: prompt displays, the server is ready to accept network traffic.
5. Display the network settings. Run the command show interface 1 charact
October 2014 Avaya Media Processing Server 500 Hardware Installation and Maintenance
Comments? infodev@avaya.com
Changing the Network Settings
81