Sparc Server Maintenance Serial Connection; Serial Port Connections To Multiple Sparc-Based Servers; Preparing To Apply Power To The Mps 500 - Avaya Media Processing Server 500 Hardware Installation And Maintenance

Installing Hardware and Configuring Connectivity
Refer to the online Installation Guide for the IBM x3550 at

SPARC Server Maintenance Serial Connection

Connect the LOM (Lights Out Management) cable assembly between the LOM connection on the
Sun Fire to Serial Port A on the Speech Server.
The serial port settings are 9600 baud, 8 bit no parity. This connection can be operated with
HyperTerm to monitor and control the SPARC Server, see
page 200, or with the optional terminal server.

Serial Port Connections to Multiple SPARC-Based Servers

You can implement remote management of multiple servers by using a terminal server. This
provides network for extended serviceability, see

Preparing to Apply Power to the MPS 500

1. Verify that all circuit packs are locked into their assigned slots.
2. Verify that all cable connectors are secured.
3. Set all circuit breakers to OFF.
Note:
Keep all external LAN cables unplugged until you have completed the site IP networking
configurations on the servers.
Avaya Media Processing Server 500 Hardware Installation and Maintenance
44
Configuring the Terminal Server
Comments? infodev@avaya.com
http://www.ibm.com
DB-9 to RJ-45 Serial adapter on
on page 77.
October 2014