Avaya Media Processing Server 500 Hardware Installation And Maintenance page 94

Configuration (Part I)
Settings are saved to Flash memory
Command executed
Checking the Software Version
Check the version of your InReach software by running the show version command at the prompt.
InReach:0 >>show version
Linux Kernel Version:
Linux In-Reach Version:
Software Version:
Ppciboot Version:
InReach:0 >>
Updating the ppciboot Firmware
Run the update ppciboot command to update the firmware.
InReach:0 >>update ppciboot 10.7.200.1
.........
TFTP Download complete, verifying file integrity
.File ok, copying boot image to flash
..................
Restarting the System
Run the reload command to restart the system.
InReach:0 >>reload
Do you really want to proceed? y/n y
Restarting System!...
Please wait for system to restart..
INIT: Switching to runlevel: 6
InReach:0 >>
Disconnected
Restarting syst
1.1.0 (Jul 9 2003 - 11:03:10)
CPU Test Passed
LX-4016 (Copperhead) 16-port unit
The system is running on DC
Warning: DC_B bit is set in CPLD System Fail Status Register
No system failures were discovered
CPLD Test Passed
FEC Test Passed
...........................
...........................
Welcome to MRV Communications, In-Reach Product Division.
Port 0 Speed 9600
Updating the Server Software
Run the update software command. Check which version of software you have by running the show
version command.
The default IP address for MpsAp1 is 10.7.200.1. Substitute your IP address, if it is different.
Login: InReach
Password: ****** (access)
InReach:0 >enable
Avaya Media Processing Server 500 Hardware Installation and Maintenance
94
2.4.19
36
3.0.1
1.0.1
Comments? infodev@avaya.com
October 2014