Table of Contents
Advertisement
7. Select Port 1. Check that your speed, parity, and bit number settings are as shown in the
preceding window.
8. From the Inbound Authentication list choose None. This eliminates a double login when
using the terminal server.
9. Click Save at the top of the window to save the changes.
10. The parameters for Ports 1, 2, 5 - 16 are already set up. Copy the settings to the other ports.
Click Copy at the bottom of the screen.
Ports 3 and 4 are set to 38400 baud (used with the higher speed ttyb ports on SPARC-based
machines).
11. The Copy window appears. To copy the parameters to multiple ports, select the desired
ports on the left and click >>. Do not copy ports 3, 4 and 17.
October 2014
Avaya Media Processing Server 500 Hardware Installation and Maintenance
Comments? infodev@avaya.com
Making the Initial Connection
85
Advertisement
Table of Contents
