Chapter 4: Configuration (Part Ii); Configuring The Binding Order; Configuring Redundant Ethernet - Avaya Media Processing Server 500 Hardware Installation And Maintenance

Chapter 4: Configuration (Part II)

This chapter covers:

1. Configuring Redundant Ethernet

2. Setting up NetMeeting
3. Verifying Boot ROM Settings
4. System Self Tests

Configuring the binding order

About this task
Configure the binding order of the network cards. The Private network interface card must be bound
first and then the Customer/Public network interface card. If a team is present then the team of the
Private Network should be bound first.
Procedure
1. Choose Start > Control Panel > Network and Internet > Network and Sharing Center.
2. Click Change adapter settings.
3. In the Network Connections window, press the ALT key.
The system displays a hidden menu.
4. Choose Advanced > Advanced Settings.
5. In the Connections box, ensure that the contact center subnet connection is listed first.
If it is not listed first, adjust the order.
Configuring Redundant Ethernet
Redundant Ethernet provides a second Ethernet switch with fail-over capability so that the loss of a
single Ethernet Switch does not compromise system operation.
October 2014 Avaya Media Processing Server 500 Hardware Installation and Maintenance
Comments? infodev@avaya.com
99