Avaya Media Processing Server 500 Hardware Installation And Maintenance page 108

Configuration (Part II)
4. Ensure the IP and node name used are unique to the MPS subnet. Example: IP: 10.7.210.1
Hostname: RAID1
5. Configure the IP, Netmask, and Gateway accordingly to allow access on the network. In the
RAID DH - HyperTermial window, select view and edit Configuration parameters,
Communication Parameters, Internet Protocol (TCP/IP), <your IP address information>,
Address <IP address>.
6. Verify the Address, NetMask, and Gateway settings. Example: IP: 10.7.210.x Netmask:
255.255.0.0 Gateway: 10.7.200.1 (can be the IP of the MPSAP)
7. Save your IP modifications. In the RAID DH - HyperTermial window, select view and edit
Configuration parameters, Communication Parameters, Internet Protocol (TCP/IP), <your IP
address information>, Change/Set IP Address?
Avaya Media Processing Server 500 Hardware Installation and Maintenance
108
Comments? infodev@avaya.com
October 2014