Avaya Media Processing Server 500 Hardware Installation And Maintenance page 150

Operation and Administration
The following modules can cause TMS hardware initialization errors:
• FPGA
• memory
• card initialization
- base card Initialization
- MDM Initialization
- ALI
- DCC
The TMS hardware generates alarms due to the following conditions:
• defective hardware
• hardware configuration files corrupt or unreachable by TMS
• hardware or software versions incompatible
• network configuration
• bootp configuration is incorrect
Troubleshooting TMS Hardware Initialization Errors
Use the serial console output to isolate a configuration error from defective hardware. (See
36: TMS Front Panel
Avaya Media Processing Server 500 Hardware Installation and Maintenance
150
on page 138 and Debug Terminal Connection Settings
Comments? infodev@avaya.com
Figure
on page 134.)
October 2014