Performing Post Rollout Steps For Windows 2003 - Avaya Media Processing Server 500 Hardware Installation And Maintenance

Maintenance
If windows was not activated previously, type in the product key from COA, if available. Else
skip this step. See
Configuring the screen saver
Procedure
1. Go to Control Panel > Appearance and Personalization > Personalization > Change
Screen Saver.
2. Set the screen saver to: Blank, 10 Minutes, and "On resume, display logon screen".
3. Go to Internet Explorer, and test the settings.

Performing post rollout steps for Windows 2003

About this task
Use the following steps to perform the post rollout steps for Windows 2003 using the Windows
Setup Wizard
Procedure
1. Open the Windows Setup Wizard.
2. Click Next.
3. Click Accept License and click Next.
4. Modify Regional and Language options and click Next.
5. Click Name > Multimedia Applications > Organization > Avaya.
6. Enter the product key located on attached Certificate of Authenticity (COA).
Use KM8FW-3TRWM-DXBXP-FRHBR-TVCTM if none is available, this code passes the
startup but will not activate.
7. Go to Licensing Modes > Per Server > 5 Connections.
8. Create Administrator Password.
9. Set Time Zone.
10. Go to Networking Settings > Typical Settings.
11. Go to Workgroup.
12. Click Finish.
The System reboots.
13. Set CD to drive V second to L:.
14. Go to Windows Explorer and cd to c:\pnp\Drive_letters.
15. Double-click changeletter.cmd.
16. Configure Networking to match customer configuration.
Avaya Media Processing Server 500 Hardware Installation and Maintenance
174
Activating windows 2008
Comments? infodev@avaya.com
on page 175.
October 2014