Netmasks - Avaya Media Processing Server 500 Hardware Installation And Maintenance

Configuration (Part I)
Note:
Newer versions of the MPS software package already contain this change.
Edit the sys.cfg file as shown in the following partial sample:
# EnetA broadCastIP
# Synopsis:
# Specify the broadcast IP address of the network
# connected from this host to ENET-A of the DTC's.
# Default is 192.168.101.255
#
# broadcastIP = broadcast IP address from
#
#
#ENET-A 192.168.101.255
ENET-A 10.7.255.255// add this line
ENET-B 10.8.255.255// add this line
#

Netmasks

Edit the /etc/netmasks file to provide a network mask for the MPS 500 Class B private networks
10.7.0.0 and 10.8.0.0.
Note:
Newer versions of the MPS software package already contain this change.
Edit the netmasks file as shown in the following sample output.
#/etc/netmasks
# The netmasks file associates Internet Protocol (IP) address
# masks with IP network numbers.
#
# network-numbernetmask
#
# The term network-number refers to a number obtained
# from the Internet Network Information Center. Currently
# this number is restricted to being a class A, B, or
# C network number. In the future we should be able to
# support arbitrary network numbers per the Classless
# Internet Domain Routing guidelines.
#
# Both the network-number and the netmasks are specified in
# "decimal dot" notation, e.g:
#
# 128.32.0.0 255.255.255.0
#
#10.10.173.0255.255.255.0
10.0.0.0 255.255.255.0
47.0.0.0 255.255.255.0
Avaya Media Processing Server 500 Hardware Installation and Maintenance
60
// comment out this line
Comments? infodev@avaya.com
October 2014